cat.8100y aluminum electrolytic capacitors pressure relief vent l + 2 max. d + max. 15 min 4 min sleeve (polyolefin) d p 0.5 d p 8 0.8 3.5 10 0.8 5.0 12.5 1.0 5.0 16 1.0 7.5 d 0.6 0.6 0.6 0.8 18 1.0 7.5 0.8 u 1 b 2 t 3 1 4 a 5 2 6 2 7 1 8 m 9 p 10 d 11 configuration capacitance tolerance ( 20%) rated capacitance (220 f) rated voltage (10v) series name type in case l > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. d 8 10 pb-free leadwire pb-free polyolefin sleeve pd 12.5 to 18 hd configuration (mm) p.e.t. sleeve product is also available upon request. bt series high temperature range, for +125 c use highly dependable reliability withstanding load life of 2000 to 10000 hours at +125 c. suited for automobile electronics where heavy duty services are indispensable. compliant to the rohs directive (2002/95/ec). radial lead type specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics item 40 to +125 c (10 to 250v), 25 to +125 c (350 to 450v) 10 to 450v 1 to 4700f 20% at 120hz, 20 c printed with white color letter on blue sleeve. after storing the capacitors under no load at 125 ? c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they shall meet the specified values for the endurance characteristics listed above. type numbering system (example : 10v 220 f) 10 3 4 16 2 4 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 to 250 3 6 350 to 450 6 the specifications listed at right shall be met when the capacitors are restored to 20 ? c after d.c. bias plus rated ripple current is applied for less than 50v ( d = 8 : 2000 hours, d = 10 : 5000 hours, d > = 12.5 : 10000 hours), 63 to 100v ( d = 8 : 2000 hours, d = 10 : 3000 hours, d > = 12.5 : 5000 hours), more than 160v (2000 hours) at 125 ? c , the peak voltage shall not exceed the rated voltage. 120hz z 25 c / z+20 c z 40 c / z+20 c rated voltage (v) 120hz, 20 c for capacitance of more than 1000f, add 0.02 for every increase of 1000f. rated voltage (v) tan (max.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 160 to 250 0.20 350 to 450 0.24 impedance ratio zt / z20 (max.) please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. dimension table in next page. rated voltage (v) leakage current after 1 minute's application of rated voltage, leakage current is not more than 0.03cv or 4 (a), whichever is greater. 160 to 450 cv < = 1000 : i = 0.1cv + 40 (a) max. (1 minute's) cv > 1000 : i = 0.04cv + 100 (a) max. (1 minute's) 10 to 100 bt bw high temperature please refer to page 20 about the end seal configulation. capacitance change dissipation factor leakage current less than or equal to the initial specified value 300% or less than the initial specified value (10 to 100v) 200% or less than the initial specified value (160 to 450v) within 30% of the initial capacitance value (10 to 100v) within 20% of the initial capacitance value (160 to 450v)
cat.8100y aluminum electrolytic capacitors v(code) 63 (1j) 80 ( 1k) 100 ( 2a) case size ? ? ? c 100khz impedance ( ? c 100khz bt series frequency coefficient of rated ripple current frequency cv 1000 > cv 1000 cv 120hz 0.50 0.67 v 10 to 100 300hz 0.64 0.79 1khz 0.83 0.91 10khz or more 1.00 1.00 rated ripple current (marms) at 125 c 120hz 10 ? ? ? ? ?
|
